Our primary shaping machine, equipped with 6 way blade, wide tracks and rippers. Currently at Royal Wellington GC having previously shaped Millbrook, Harewood, Cromwell and laser levelled AMI Stadium.
A limited selection from our full range of machines:
Whatever it takes, we shape it up
TIC prides itself in the knowledge it has the most advanced and up to date equipment and resources to provide the best possible service to customers. The technology used at TIC Projects is constantly upgraded. This investment gives us an enivable reputation within the sports turf construction and maintenance industry.
> To view our machines, select one from the list above
One of our original machines and still going strong. Great for smaller projects or areas requiring a smaller machine.Having done service on a number of projects in Auck, as well as Kinloch, Millbrook, Cromwell and Wanaka it has had a varied career.
Excavator 13 tonne
New to us in 2011, fitted with a tilt bucket and standard tracks to allow ease of transport between projects.
Our number 1 shaping excavator with tilt bucket and wide tracks. It's also seen service in Auckland, Millbrook, Harewood and currently at Royal Wellington Golf Club.
We have two of these machines, one in Wellington and the other in Queenstown. Used mainly for drainage and irrigation trenching.
This smaller versatile machine is predominately used for greens irrigation and drainage along with bunker construction and finishing.
Tracked Loader/Shaper 3 tonne
Again these versatile machines are a must have around the worksite with attachments fitted to perform a number of tasks.
Fitted with 4 way blade and chain trenching attachment used for irrigation and drainage installations.
This combination has carted 1000's of cubic metres of sand, gravel and soil since its purchase for the construction of Kinloch. Ideal in areas where larger dump trucks are not able to access.
McCormick C Max 105
Normally coupled to a 6 tonne tandem tip trailer this versatile tractor also comes in handy when stone burying and preping soil prior to seeding.
Both fitted with high flotation turf tyres this combination can be used on existing golf courses and bunker works with minimal footprint.
Another 50 hp hydro tractor used for finishing and prep work with a number of various attachments.
Used predominately for lasering the subgrade and finished grades of tee surfaces. With an accuracy level of + or - 5mm this machine is a must on golf course construction projects.
Our latest addition. 30 hp tractor with 1.7m mid mounted laser controlled 4 way blade. Also use as a general tractor for renovation work etc.
Laser Level Box Blade
50 hp Tractor 2.2mtr Box Blade and Laser Level
Used on larger tees and sports field levelling. Can be set on 'float' for final prep on fairways.
Laser LB42 Sensor Unit
Fitted to a number of machines including dozers for leveling or excavators for drainage trenching to guarantee correct fall to sumps/outfalls etc.
Toro Sandpro 3020
Normally used as bunker rakes these units have been fitted with front blades, rakes or box blades for finishing and preparing topsoil, green and tee surfaces.
Toro Sandpro 2020
Fuel Storage and Site Trailer
With all this machinery we need a good supply of fuel on site along with a fuel trailer to shuttle it out to the machines on site.